Brown's Quality Electric has been serving Homestead and Miami-Dade County since 1993. That's 33 years of showing up for homeowners, landlords, business owners, and property managers across South Florida. We started as a small, family-run operation and we've stayed that way on purpose. We live and work in this community, and it shows in our work.
When you call us, you reach a local electrician who knows the neighborhoods, the housing stock, and the demands that South Florida's climate puts on electrical systems. We handle everything from a single tripped breaker to a full panel replacement, and we bring the same care to a small repair as we do to a large commercial job.
Local electricians. Safe wiring. Honest quotes.
Call (786) 926-3289 to schedule service or get a quote today.
Whether this is your first repair or your tenth, you deserve an electrician who takes the work seriously and explains what's going on before touching a single wire. We handle the full range of residential and commercial electrical work: repairs and troubleshooting, breaker panel upgrades, outlet and switch installation, lighting, wiring and rewiring, dedicated circuits, and electrical safety inspections.
Every job we take on is completed to code. That means GFCI and AFCI protection where the code requires it, proper grounding and bonding throughout, and clean workmanship you won't have to revisit. We offer same-day scheduling on many calls, and we're available after hours for electrical emergencies that can't wait until morning. Call today and we'll set the appointment.
Most homeowners can't tell a minor wiring issue from a serious one, and that's exactly why it's worth calling a professional when something feels off. Flickering lights, dead outlets, breakers that trip repeatedly, and circuits that go dark without explanation are all signs that something in the system needs attention.
When we arrive, we start with a thorough diagnostic. We trace the problem to its source rather than guessing and replacing parts. We check for arc-fault and ground-fault conditions, inspect the affected circuit, and give you a clear explanation of what we found and what it will take to fix it. Whether it's a single faulty outlet or a circuit that needs to be rewired, we handle it completely. We'll get your lights back on fast.
South Florida's electrical demands are real. Air conditioning runs hard for most of the year, and older panels were never designed to carry the loads that modern homes put on them. If your panel is 30 or 40 years old, or if you're adding major appliances, an EV charger, or a backup generator, a service upgrade may be the right move.
We handle breaker panel repair and replacement, 200-amp service upgrades, main panel replacements, and subpanel installations. We run load calculations so the new panel is properly sized for your home or building. We also handle service-entrance and meter upgrades when the utility connection itself needs to be brought up to current standards. We make the fix and leave it tidy.
Your home deserves wiring that's safe and up to code, especially in a region where heat, humidity, and salt air accelerate the wear on older materials. Homes built decades ago may still have knob-and-tube wiring, aluminum branch circuit wiring, or other materials that no longer meet current safety standards.
We handle whole-home rewiring, old wiring replacement, knob-and-tube removal, and aluminum wiring remediation. The process involves opening walls selectively, running new copper conductors, and bringing every circuit into compliance. It's not a small job, but it's one of the most important investments you can make in a home's long-term safety. We walk you through the scope before we start so there are no surprises. We'll get your lights back on fast.
Over the years, we've seen every kind of panel and circuit, and we've installed just about every type of outlet, switch, and fixture a home or business could need. GFCI outlets in bathrooms, kitchens, garages, and outdoor locations. AFCI outlets and breakers in living spaces and bedrooms. USB outlets at desks and nightstands. Dimmer switches, smart switches, and standard replacements throughout.
On the lighting side, we install recessed and LED fixtures, ceiling fans, pendant lights, under-cabinet lighting, outdoor and security lighting, and motion sensor lights. Exterior lighting matters in this area, whether you're lighting a driveway, a dock, or a commercial parking lot. We wire it right, seal it against the elements, and make sure it performs. We make the fix and leave it tidy.
Electric vehicle ownership is growing steadily across South Florida, and a Level 2 home charger is one of the most practical upgrades you can add to a property. We install Level 2 EV chargers in garages, carports, and driveways. The work involves running a dedicated circuit from your panel, installing the charger mount, and making sure the panel has the capacity to support it. If an upgrade is needed first, we handle that too. We wire the circuit to code and test the full system before we leave.
Hurricane season is not a hypothetical in Miami-Dade County. Extended power outages after major storms are a real risk, and a properly wired backup generator gives your home or business a reliable source of power when the grid goes down. We install transfer switches, wire standby generators, and handle the full electrical hookup for whole-home generator systems. We also install whole-home surge protection to guard your equipment against voltage spikes when power is restored. A generator is only as useful as the wiring behind it, and we do that part correctly.
Trusted for years. Ready for your wiring. Call anytime.
We've wired this area long enough to know what works, and dedicated circuits are one of the most common requests we handle. Dryers, ranges, refrigerators, water heaters, dishwashers, and other large appliances all perform better and run more safely on their own dedicated circuit. We also run circuits for garage workshops, EV chargers, and outdoor equipment.
Pool and spa electrical hookup is a regular part of our work in South Florida. We handle the full electrical side: bonding, GFCI protection, underwater lighting circuits, and equipment connections. For home additions, kitchen remodels, and bathroom renovations, we run new circuits and integrate them cleanly into the existing panel. Smoke and carbon monoxide detector installation is part of that work too. We handle the grounding and bonding that keeps the whole system safe and code-compliant.
A local electrician homeowners rely on is one who will tell them the truth about what they're looking at. Our electrical safety inspections do exactly that. We go through the panel, the wiring, the outlets, and the fixtures, and we give you a written account of what we found.
Inspections are useful in a lot of situations: before buying a home, before listing one for sale, after a storm, or when a property manager needs documentation that a rental unit is up to code. We check for GFCI and AFCI protection, proper grounding, panel condition, and any wiring that doesn't meet current standards. Call today and we'll set the appointment.
We show up on time and ready to wire, and we give you the full picture on cost before any work begins. If there's an additional issue we find during the job, we tell you about it and explain your options. There are no surprise line items when the invoice arrives.
We offer same-day scheduling on many calls. We're available on weekends, and we handle after-hours electrical emergencies when something can't wait. Whether you're a homeowner dealing with a sudden outage or a property manager who needs a unit ready for a new tenant, we work around your schedule and get the job done right.
We're based in Homestead and we serve communities throughout the south Miami-Dade area. Our regular service area includes Florida City, Leisure City, Naranja, Princeton, Goulds, Cutler Bay, Palmetto Bay, and Kendall, along with the surrounding neighborhoods in between. If you're not sure whether we cover your area, just call and ask. We're familiar with the roads, the housing types, and the electrical systems common to this part of the county, and we get to jobs quickly.
We have been serving Homestead and Miami-Dade County since 1993, which puts us at 33 years in this community. We started as a small, family-run operation and have stayed that way. That history means we know the local housing stock, the climate demands, and the code requirements that apply to work in this part of South Florida.
We are based in Homestead and serve communities throughout the south Miami-Dade area. That includes Florida City, Leisure City, Naranja, Princeton, Goulds, Cutler Bay, Palmetto Bay, and Kendall, along with the neighborhoods in between. If you are unsure whether we cover your address, call (786) 926-3289 and we will confirm.
We have been doing this work in the same community for over three decades, and we treat every job the same way whether it is a single outlet repair or a full commercial installation. Work is performed by licensed electricians who know current code, and we back every job with a workmanship guarantee. We show up on time and ready to wire.
We give you a complete, up-front quote before any work begins. If we find an additional issue during the job, we tell you about it and explain your options before proceeding. There are no surprise line items when the invoice arrives.
We explain what we found during the initial diagnostic before we touch anything, and we walk you through the repair or installation plan before we start. If something unexpected comes up mid-job, we stop and talk it through with you. We want you to understand what is happening in your home at every step.
We back every wiring job with a workmanship guarantee. If an issue returns that is related to work we performed, call us and we will make it right. Our goal is work that lasts, not work that needs revisiting.
You get licensed electricians on the job, not subcontractors who are unfamiliar with how we operate. We are locally owned and operated electricians, and the people who show up at your door are part of our team. That consistency matters to us and to our customers.
We maintain our test equipment and tools on a regular basis because accurate diagnostics depend on it. A faulty meter or worn tool leads to missed problems, and that is not how we operate. Reliable equipment is part of doing the job correctly the first time.
Brown's Quality Electric has been the trusted name for electrical work in Homestead since 1993. Thirty-three years of experience, a workmanship guarantee on every wiring job, and a crew of licensed electricians who take the work seriously. Whether you need a quick repair, a full panel upgrade, or a specialty installation, we're ready to help.
Residential or commercial, large or small, we handle it. Call (786) 926-3289 to request a quote or schedule service.
Pick the date. We do the wiring. We clean up after.
We handle the full range of electrical work for homes and businesses in Homestead and across Miami-Dade County, from a single tripped breaker to a complete service upgrade. South Florida's climate adds its own demands: hurricane season, frequent lightning, year-round air conditioning loads, and backyard pools that require careful code-compliant wiring. The table below breaks down what each service covers, who it fits best, and what is practical to know before you call. When you are ready to schedule, call us for a straight quote.
| Electrical Service | Scope of Work | Ideal For | Good to Know |
|---|---|---|---|
| Electrical Safety Inspections |
| Buyers, sellers, landlords, and homeowners who want to know the condition of their electrical system | We walk through the findings with you and explain what, if anything, needs attention. Pricing is discussed up front before the inspection begins. |
| Outdoor and Dock Circuits |
| Properties with outdoor living areas, docks, or detached structures needing power | Outdoor circuits in South Florida need weatherproof covers and hardware rated for a humid, coastal environment. We spec and install accordingly. |
| Whole-Home Generator Installation |
| Homestead and Miami-Dade homeowners who need reliable backup power through hurricane season | We handle the electrical side of the installation: the transfer switch, the circuit, and the panel capacity. When the grid goes down, a properly wired generator keeps essential circuits running. |
| Solar and Battery Installation |
| Homeowners adding solar panels or battery storage and needing the electrical side handled correctly | We handle the electrical portion: the wiring, the interconnect, and confirming your panel can support the system. Equipment selection and solar design are handled by your solar provider. |
| Electrical Panel and Service Upgrades |
| Homes with an outdated or undersized panel that cannot keep up with modern loads | Panel work is permitted and inspected. We handle the coordination and make sure everything meets current code before the job is closed out. |
| Electrical Repairs and Troubleshooting |
| Homeowners or tenants dealing with a wiring symptom they cannot explain | A proper diagnosis first saves time and money. Some symptoms look minor but point to a wiring issue that needs prompt attention. |
| Lighting Installation |
| Anyone updating fixtures, adding outdoor lighting, or improving a room's lighting layout | Weatherproof outdoor fixtures matter in a coastal South Florida climate. We select and install fixtures rated for the conditions here. |
| Surge and Lightning Protection |
| Any South Florida home, given the region's high lightning strike frequency | A whole-home surge device installs at the main panel and absorbs excess voltage before it reaches your wiring and connected equipment. It is one of the higher-value protective upgrades for homes here. |
| Breaker and Fuse Repair |
| Any home where a breaker trips repeatedly or a fuse blows without an obvious cause | Repeated tripping is not always a breaker problem. It can signal an overloaded circuit or a wiring fault that needs to be traced before replacing parts. |
| Corrosion-Resistant Coastal Fixtures |
| Coastal and near-coastal properties where standard fixtures degrade quickly | Standard outdoor hardware corrodes faster than most homeowners expect near the coast. Using the right fixtures from the start avoids repeated replacements. |
| Outlet and Switch Installation |
| Homeowners adding outlets, upgrading switches, or replacing devices that no longer work reliably | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. We install to current code on every job. |
| Ceiling Fan Installation |
| Homeowners adding fans to bedrooms, living areas, or covered patios | If there is no existing ceiling box rated for a fan, we install the right support before mounting. A fan hung from a standard light box is a safety issue. |
| Wiring and Rewiring |
| Older homes with wiring that no longer meets code, or any property undergoing renovation | Older wiring in South Florida homes can be affected by humidity and age. A rewire removes the risk and brings the home up to current standards. |
| Pool and Spa Wiring |
| Homestead and surrounding area properties with pools, spas, or hot tubs | Water-adjacent electrical work is heavily regulated by code. Proper bonding and GFCI protection are required, and we do this work to the letter of current electrical code. |
| Dedicated Appliance Circuits |
| Homeowners adding a major appliance, a workshop, or any load that needs its own circuit | Running a high-draw appliance on a shared circuit causes nuisance trips and can damage the appliance. A dedicated circuit solves both problems. |
What are the signs that a breaker panel needs to be upgraded?
The most common signs are breakers that trip frequently without an obvious overload, a panel that feels warm to the touch, a fuse box that has not been replaced with a breaker panel, and a home that has added major appliances or square footage since the original service was installed. If your home is running on 100-amp service and you are adding air conditioning loads, an EV charger, or a generator, a service upgrade is often the right call. We do a load calculation before recommending any panel work so the upgrade is sized correctly for your home.
Why do my breakers keep tripping?
Repeated tripping usually points to one of three things: a circuit that is carrying more load than it was designed for, a wiring fault somewhere on the circuit, or a breaker that has weakened and trips below its rated threshold. A single trip after plugging in too many devices is normal. Repeated trips on the same circuit, especially with no obvious overload, are worth a professional look. We trace the cause before replacing anything.
Is electrical work permitted and inspected?
Panel upgrades, service changes, new wiring runs, and generator hookups are all work that typically requires a permit and a code inspection in Miami-Dade County. We handle the permitting process and make sure the work is inspected and closed out correctly. Skipping permits on electrical work creates problems when you sell the home or file an insurance claim, so we do not cut that corner.
Same-Day and After-Hours Availability
We offer same-day appointments when the schedule allows, and we are available after hours and on weekends for situations that cannot wait. When you call, we give you the earliest available window and get you on the schedule.
How do I know if my home needs to be rewired?
Older homes with aluminum wiring, knob-and-tube systems, or cloth-insulated wiring are the most common candidates for a rewire. Other indicators include outlets and switches that do not work reliably, a panel that has been patched and modified repeatedly over the years, and any home where the wiring has never been updated since original construction. We inspect the visible wiring and the panel and give you a straight assessment of what the system looks like and what, if anything, needs to be done.
What does GFCI protection do and where is it required?
A GFCI outlet or breaker monitors the flow of current on a circuit and trips within milliseconds if it detects an imbalance, which is the signature of current flowing through a person or a wet surface. Current code requires GFCI protection in kitchens, bathrooms, garages, outdoor locations, and anywhere near water, including pool and spa circuits. Older homes often have these areas unprotected. We install GFCI devices to current code as part of any repair or upgrade that touches those areas.
What do flickering or dimming lights usually mean?
Occasional flickering when a large appliance starts up is normal and usually reflects a momentary voltage drop on a shared circuit. Persistent flickering, dimming that happens without a clear trigger, or lights that flicker in multiple rooms at once can point to a loose connection, a failing breaker, or a service entrance issue. These symptoms are worth a professional diagnosis rather than waiting to see if they resolve on their own.
Upfront Quotes With No Surprise Fees
We discuss pricing before any work begins so you know what the job costs before we start. There are no surprise charges added after the fact.
Is it safe to use outlets or switches that feel warm or make a buzzing sound?
No. A warm outlet or switch, a buzzing sound from a device or panel, or any discoloration around an outlet face are reasons to stop using that outlet or switch and call us. These symptoms can indicate a loose connection, an overloaded circuit, or a wiring problem that poses a fire or shock risk. Turn off the circuit at the breaker if you can do so safely and do not use the affected outlet until it has been inspected.
What does whole-home surge protection actually cover?
A whole-home surge protection device installs at the main panel and intercepts voltage spikes before they travel through your home's wiring. It protects every circuit in the house, including appliances, electronics, and HVAC equipment. It does not replace outlet-level surge strips, but it adds a first line of defense that outlet strips alone cannot provide. In South Florida, where lightning activity is among the highest in the country, it is one of the more practical protective upgrades available.
Work Performed by Licensed Electricians
Every job, from a single outlet to a full service upgrade, is performed by licensed electricians who know what current code requires in Miami-Dade County.
How does EV charger installation work?
A Level 2 home EV charger requires a dedicated 240-volt circuit, typically a 50-amp circuit for most home chargers. We start by checking your panel's available capacity and confirming there is room for the new breaker. If the panel is already near capacity, we discuss whether a service upgrade makes sense. The circuit runs from the panel to the garage or charging location, and the outlet or hardwired connection is installed to match the charger you have chosen. We work with all major charger brands.
Can you add circuits for a workshop, appliance, or new room?
Yes. Adding a dedicated circuit for a workshop, a new kitchen appliance, a dryer, or a room addition is straightforward work as long as the panel has available capacity. We run the circuit, install the correct breaker, and confirm the wiring is sized for the load. If the panel is full or undersized, we discuss a subpanel or service upgrade before proceeding so the new circuit is properly supported.
How long does a panel upgrade or rewire typically take?
A panel upgrade on a single-family home usually takes one day, sometimes less if the scope is limited to the panel itself. A whole-home rewire takes longer and depends on the size of the home, how accessible the walls are, and whether the work is done in an occupied home or during a renovation. We give you a realistic timeline when we quote the job so you can plan around it.
Call (786) 926-3289 and we will walk you through what your job involves, give you a straight quote, and get it on the schedule.
(786) 926-3289